Disaster Area Designs Smart Switch
The SMARTSwitch 2 is a compact MIDI controlled channel and remote switch. Two isolated 1/4″ mono jacks connect to your gear, and the SMARTPedal interface allows for full real-time control or direct MIDI access. The SMARTSwitch 2 can change your amp channels in response to incoming MIDI Continuous Controller (CC) or Program Change (PC) messages on any MIDI channel.
Dual isolated channel or remote switch outputs
Output A may act as a single TRS output
Instant access to switch settings
Outputs may be bypassed or engaged using MIDI CC
Outputs may be assigned to incoming MIDI program changes using MIDI learn
Each output is configurable to normally-closed, normally open, or momentary function.
Fully passive signal path – can switch DC or control voltage
Optical relay switching – no moving parts.
9VDC 48mA max
All SMARTPedals share the following features:
MIDI IN & MIDI OUT connectors
MIDI INPUT merges data through to output
MINI-USB port for firmware updates and feature additions
MIDI channel selectable using MIDI CC messages
DC 9V, center-negative power input (current varies by pedal.)
Die-cast aluminum housing with textured or glossy powder-coat finish
Jacks spaced to accommodate most straight and right-angle plugs (George L’s, Lava Mini-ELC, GLS Pancake, etc.)
Connecting the SMARTSwitch 2 to your amp requires either a single TRS 1/4″ cable or two TS / mono cables. Each output is fully isolated so that two separate amps may be controlled with the same SMARTSwitch.
The pedal is second hand but is in mint condition.